Chimassorb 2020 Alternative | Light Stabilizer 2020 Selection, CAS 192268-64-7

Light Stabilizer 2020: Selection and Sourcing Alternatives

In one sentence: Light Stabilizer 2020 is now a category term for the oligomeric HALS under CAS 192268-64-7. Select a sourcing alternative in four steps: confirm the chemical identity, compare checkable data, set a loading range by part geometry, and run a ladder trial on the same formulation. Tiangang's grade in this class is HS-200A (see also HS-200).

"Light Stabilizer 2020" no longer names a single imported grade. UV-2020, LS-2020 and HALS 2020 are used by several suppliers for the same class of oligomeric hindered amine light stabilizer. A buyer really has three questions: is the incumbent material the same chemical substance, can a candidate grade's data be checked, and how is a change validated in the actual formulation. This guide follows that order and links to the two relevant Tiangang grades where each belongs.

First, confirm the chemical identity: what CAS 192268-64-7 tells you

Judge a 2020-type product by its registry number, not by its trade name. Published data for this class correspond to CAS 192268-64-7 and the chemical name 1,6-hexanediamine, N,N'-bis(2,2,6,6-tetramethyl-4-piperidinyl)-, polymers with 2,4,6-trichloro-1,3,5-triazine, reaction products with N-butyl-1-butanamine and N-butyl-2,2,6,6-tetramethyl-4-piperidinamine. It is a block oligomeric hindered amine light stabilizer (HALS), not a UV absorber.

The same trade name does not guarantee the same chemical identity. Check the CAS number, chemical name and molecular weight range together against the supplier's TDS and the lot COA. A sheet that gives only a trade name and a price cannot support a formulation decision.

Check these firstCAS number, chemical name, chemical class, molecular weight range, physical form
Published registry number for this class192268-64-7
Published chemical classBlock oligomeric hindered amine light stabilizer (HALS)
Tiangang grades in this classTiangang® HS-200A (CAS 192268-64-7); also Tiangang® HS-200 (Light Stabilizer 2020)

HS-200A is a single chemical substance registered under CAS 192268-64-7 with a molecular weight of 2600-3400. Its full data table is on the product page; this guide keeps only the items checked first during selection.

BASF Chimassorb® 2020 vs domestic grades: what can actually be checked

Buyers often use BASF's Chimassorb® 2020 as the reference grade for this class. Public technical material from the original manufacturer gives a baseline: a molecular weight of 2600-3400 g/mol, a melting range of 120-150 °C, and a typical addition level range for PP nonwovens. The manufacturer's brochure also shows artificial weathering curves for PP fibres; specific exposure hours are not reproduced here. These figures come from BASF published material and describe a public selection baseline for the class. They do not represent Tiangang product performance and do not constitute a performance comparison between grades.

Three checkable points of correspondence: CAS 192268-64-7; the chemical name; molecular weight 2600-3400 and pale yellow pastilles. Points that still need checking are the supply form, the additive package, and batch-specific limits and impurity control — each is defined by the supplier's own COA and TDS. A shared chemical identity does not mean equivalent performance in any given formulation, and it does not justify dropping a candidate in at the incumbent loading.

Tiangang publishes separate data for Tiangang® HS-200A and Tiangang® HS-200; select between them by part thickness and design life. Full parameters, suitable resins and recommended loadings are on each product page.

Trademark notice: Chimassorb® and BASF are third-party trademarks or trade names belonging to their respective owners. They are used here only as nominative cross-references describing a sourcing reference. No authorisation, affiliation, endorsement or performance equivalence with Tiangang is implied. This page makes no claim of "complete replacement" or "equivalent performance".

Select by part geometry: fibre, film and thick sections

Thin sections have a high surface-to-volume ratio, so the additive is more prone to volatilisation and migration; thick parts are more likely to show surface bloom once the compatibility limit is exceeded. An oligomeric HALS has very low volatility and resists extraction, holding an effective concentration longer in fine filaments and thin films. That is why this class is used for PP spinning, PP nonwovens, PE film and flat yarn.

Film, flat yarn, nonwovenThin sections and long outdoor service; Tiangang reference loading 0.1 - 0.5%
Injection mouldings, medium and thick-wall partsWatch bloom and the processing window; Tiangang reference loading 0.3 - 1.0%
Fibre and monofilamentFine denier and high-temperature spinning; Tiangang reference loading 0.3 - 0.8%

These are typical industry ranges, not guaranteed values. The actual loading depends on wall thickness, design life and the other additives in the system, and should be established by a loading ladder on the real formulation. Long-service outdoor parts such as agricultural film, geotextiles and automotive exterior trim normally combine the HALS with a UV absorber: the absorber shields incoming UV energy, while the HALS scavenges radicals that have already formed.

Systems exposed to acidic species — halogenated flame-retardant compounds or agrochemical contact, for example — need a separate check of HALS basicity and compatibility, and may call for a low-basicity or NOR grade instead. This is judged case by case on the formulation, not inferred from a grade name.

How to validate a substitution: a four-step ladder trial

Turning "same CAS class" into a purchasable decision needs comparative data from one and the same formulation. Tiangang suggests four steps:

  1. Fix the baseline: one substrate, one set of processing conditions, one batch of the other additives; run a blank, the incumbent grade and the candidate grade.
  2. Run a ladder: take two or three loadings inside the range for the part geometry (for example 0.1% / 0.3% / 0.5%); do not start at the upper limit.
  3. Measure five things: initial colour and odour, change in melt flow rate, mechanical property retention and colour difference after artificial accelerated ageing, surface bloom, and extraction / migration behaviour.
  4. Set the conclusion: judge against the technical agreement between the parties and the batch COA, then write the loading at the cost-performance knee into the formulation.

Accelerated ageing hours are only used for comparison within the same test batch. They are not converted into years of outdoor service, and figures from different light sources, irradiance levels, specimen thicknesses or substrates are not directly comparable.

Limits of use and frequently asked questions

  • HALS do not absorb UV radiation and do not replace the shielding effect of a UV absorber.
  • Beyond the compatibility limit the additive blooms to the surface, harming appearance and print adhesion. Protection also stops scaling linearly.
  • The figures and guidance here follow Tiangang's published technical material, the original manufacturer's published material and common industry practice. For a specific formulation, refer to the batch COA and the technical agreement between the parties.

Is "Light Stabilizer 2020" a brand name or a category?

Both. It began as one imported grade's name and is now used by several suppliers as a category term for the same chemical class, commonly written UV-2020, LS-2020 or HALS 2020. Select by CAS number and chemical name, not by trade name.

Is it the same CAS number, 192268-64-7? How do I check the chemical name and molecular weight?

Published data for this class correspond to CAS 192268-64-7 and a molecular weight of 2600-3400. Compare the CAS number, chemical name, chemical class, molecular weight range and physical form side by side on the supplier's TDS, and confirm that the lot COA matches the delivered batch.

What is the relationship between HS-200A and the imported 2020 reference grade?

Both are oligomeric HALS in the same chemical class, registered under CAS 192268-64-7, with a molecular weight of 2600-3400. Tiangang positions HS-200A as a sourcing alternative to imported 2020-type grades. Sharing a chemical class does not mean equivalent performance in any given formulation, so a substitution has to be validated on the actual system.

Can it replace the incumbent grade one-for-one, or does the loading need a new trial?

Not on assumption. Run the four-step ladder trial and confirm colour, melt flow, mechanical retention and bloom before fixing the loading. Tiangang makes no claim of unverified one-for-one equivalence.

Which parameters matter for PP nonwovens, fibres and films?

Start with chemical identity (CAS, chemical name, class), then molecular weight and volatility, extraction resistance and compatibility with the resin; finally set the loading range by part thickness and design life. Fine filaments and films put the most weight on low volatility and migration resistance; thick parts on the compatibility limit and surface bloom.

Do long-service outdoor parts need a UV absorber alongside the HALS?

Normally yes. A UV absorber shields incoming UV energy and the HALS scavenges radicals that have already formed. Agricultural film, geotextiles and automotive exterior parts usually need both to reach their design life. The ratio is set by formulation trials.

How should acidic systems such as halogenated FR or agrochemical contact be handled?

Check HALS basicity against the acidic components of the formulation first, then select a low-basicity or NOR grade for that system if needed. This is a case-by-case formulation decision, not something inferred from the name "2020".

Which technical documents should I request before a bulk order?

Ask for that lot's TDS, SDS and COA, confirm the COA lot number matches the delivered material, and check that the figures fall inside the agreed technical specification. If the chemical identity or batch figures do not match, hold the material before compounding.

Can accelerated ageing hours be converted into years of outdoor service?

No. Accelerated ageing hours are only used for comparison within the same test batch. Data from different light sources, irradiance levels, specimen thicknesses or substrates are not directly comparable and must not be extrapolated into outdoor service years.

How do I judge whether a supplier's 2020 data sheet is trustworthy?

Check three things: whether the CAS number and chemical name are given in full, whether the figures are labelled as typical values with a stated source, and whether each lot has a matching COA and TDS. A sheet that gives only a trade name and a price cannot support a formulation decision.

To discuss a grade for your substrate, part thickness and design life, contact Tiangang on 400-094-4362. Continue from the product index or the light stabilizers overview.

Certifications

  • National High-Tech Enterprise
  • Vice Chairman Unit, China Plastics Processing Industry Association (CPPIA)
  • Vice Chairman Unit, Agricultural Plastics Branch, China Agricultural Plastics Application Technology Society
  • Member, Ageing Methods Subcommittee, National Technical Committee on Plastics (SAC/TC15/CS5)
  • Member, Society of the Plastics Industry (SPI), USA