Light stabilizers for pipes

Light stabilizers for pipes

Product description

1)Chemical Characteristic: Low adhesive, high softening point and good hardness with stable chemical characteristics of good heat stability, good dispersion performance, no poison, no frost and mucous membrane; as an ideal interior & exterior lubricant, it can be used as a substitute for  liquid paraffin, natural paraffin etc. light stabilizers| light stabilizers| light stabilizers| light stabilizers| light stabilizers

 2) Properties: White particle,flake or powder, with good lubricant effect, chemical durability and good electrical performance, soluble in aromatic hydrocarbon.

 3)Technical Specification

Melting Point 105-110

Melt Viscosity @25°C 30-50 cps

Density@25 °C 0.95 g/cm3

Acid Value (mg KOH/g) NIL

MW 1500-2000

Penetration@25°C 1.5-2 dmm

20 ft container 16 tons(with pallet)

Applications

1)Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting,  blowing molding of PE, PP and other plastic. 

 2) Act as the dispersant for masterbatches, pigment, carbon black, additive for parent material, filling parent material and other pigments. 

 3) Applied in the field of hot melt road marking material. 

 4) Act as the additive for shoeshine, floor wax, car wax, polishing wax, chinaware, pill wax, paint, coating, cable, carbon paper, wax paper, textile softening agent etc.

 5) The additive for rubber process and car anti-rust agent etc.